Features:

• Aluminum hub molded into composite yoke.
• Large ball bearings and thrust bearing in each blade grip.
• 120 degrees electronic push/pull CCPM control system for precision control.
• 4mm flybar control system.
• One-piece flybar control yoke.
• Multiple flybar paddle configurations.
• Full ball bearing washout unit.
• Tunable washout guide phasing.
• Dual bearing all metal swashplate.
• High efficiency two-stage power system.
• Composite G10 rigid frame design.
• One-way top start system.
• CNC machined metal clutch bell.
• Sleek Aero-Flo crash resilient canopy design with tinted see-through windshield.
• Steel hub triple bearing tail rotor blade grip assembly.
• Stainless steel high efficiency torque tube driven tail.
• Dual tail boom supports.
• Rear tail rotor servo mount.
• Constant driven tail drive system.
• Tuff low profile landing struts.
• Large 500cc fuel tank.

Specifications:

• Length: 47.5″
• Height: 15.2″
• Main Blade: 600-620mm
• Main Rotor Diameter: 53″
• Tail Rotor Diameter: 9.3″
• Engine: .46-.50 2-C
• Bearings: 45
• Gear Ratio: 8.76 to 1
• Main Frame and Power System:
• 2mm stacked G10 frame insures maximum rigidity.
• Two stage clutch system with a CNC machined clutch bell ensures proper alignment each and every time.
• Unique one-way starter system eliminates the need for a one-way starter extension.
• Rigid multi-level electronics trays provide impact resistance to secure electronics.
• Low profile, heavy duty landing gear.

Main Rotor and Control System:

• eCCPM-Electronic Collective/Cyclic Pitch Mixing system locked in swashplate control.
• Machined main rotor hub, molded into a strong reinforced composite yoke for long term durability.
• One piece flybar control yoke and adjustable flybar weights are included.
• Fully CNC machined metal swashplate with metal ball joints for durability and smooth operation.
• Strong 6mm feathering spindle with thrust bearings in each blade grip.
• A possible 28° pitch range to accomodate any set-up requirement.
• Can accomodate up to 620mm main rotor blades.
• Heavy duty ball links are included as standard equipment.
• Increased rigidity of the main gear offers performance for the most demanding pilot.
• Metal ball joints on both ends of all control rods to provide minimum wear and maximum precision.
• CNC machined swashplate has Teflon coated metal ball retainer for smoothness.
• Oilite bushings in the top and bottom of the washout hub insures maximum durability.
• CNC machined anti-rotation bracket is included.
• 4mm blade bolts designed to take the rigors of hard 3D flight.
• 4mm flybar provides crisp response in flight.

Tail Rotor System:

• Tail rotor system with 2 radial and one thrust bearing in each blade grip.
• Rear tail rotor servo mount provides a more direct control rod path to tail rotor bellcrank.
• CNC machined steel tail rotor hub using locknuts ensures extreme durability.
• Stainless steel torque-tube drive system with two bearing supports.
• Multi-point supported tail rotor control rod insures smooth, precise transfer of servo commands.
• 3D tail fins offer less resistance during flight.
• Break-away tail boom support standoffs provide protection to main frames during a crash.

 Body:

• Large high visibility canopy with exhaust faring and seperate clear windshield provides a clear view of your electronics.
• Attractive 50NX canopy die cut decal sheet.
• Smooth surface of canopy insures easy decal application and maximum adhesion